IZE11.eng Circuit (of class 2) which is of maximum 30 Vrms (42.4 V peak) or less, with UL1310 class 2 power supply unit or UL1585 class 2 transformer. The product is a approved product only if it has a mark on the body.
Vibration resistance is 30[m/s2]. Avoid applying vibration exceeding the allowable value to the product. Mounting Warning 1. Install a stop valve on the supply pressure side of the impact blow valve. This will be an emergency stop in case of leakage or breakage. 2. Refer to How to mount a Nozzle on page 4 for assembling the nozzle. 3.
Low-frequency operation Valves should be operated at least once every 30 days to prevent malfunction. (Use caution regarding the air supply.) 4. Manual override When a manual override is operated, connected equipment will be actuated. Operate only after safety is confirmed. 5. If the volume of air leakage increases or the valve does not operate normally, do not use the valve.
. -6- LVP Series Applicable Fluids Material and Fluid Compatibility Check List for Vinyl Chloride Air Operated Valves Chemical Compatibility Material option N Note 2) Temperature 40C or less Ammonium hydroxide Note 1) Note 2) Isobutyl alcohol Temperature 40C or less Note 1) Note 2) Isopropyl alcohol Temperature 40C or less Note 2) Hydrochloric acid Concentration 30% or less Hydrogen
, parity, number of data bits, etc.) or very short message intervals from customer equipment. 0(*3) Bad wiring or no message sent from customer equipment. (1) CRC(Refer to 3.10.2), LRC(Refer to 3.10.1). (2) XX means that it is undefined. (3) After the outgoing message is received from the customer, and displays it in case the message is a state that can not be received was continued for 30
Bonnet assembly Valve size Description Construction no. 25 40 Bonnet assembly 1 XLJ25-30-*G1 XLJ40-30-*G1 External seal/ valve seal Description Valve size Construction no. 25 40 External seal 3 AS568-030V AS568-035V Valve seal 2 B2401-V24V B2401-P42V Note 1) Refer to the Construction of for the construction numbers.
They are not a guarantee (assuming approximately 30% dispersion) and may change substantially depending on the ambient environment. 14-5.
Note) Adjust the auto switch after confirming the operating conditions in the actual setting. 29 - 30 - 31 - 32 - 3-4. Wiring method and examples of auto switches 33 - 4. Maintenance 4-1. Consumable parts Fig. 14 Replaceable seals 4-1-1. Seal kit Bore size (mm) Order No.
(This procedure shall be followed before operation after adjusting mount axis.) (1) Loosen two hex. socket head cap screws to remove the pin guide. (2) Viewed from the rod end, a pin which is inclined by 15 degrees from the center becomes visible. (3) Supply air pressure of 0.3MPa or more to the lock release port. (4) Turn the pin 30 degrees clockwise so that it is not damaged by the wooden
21 M4x10 LOCK FREE 8-3 () 2 15 0.3MPa 30 [LOCK] 22 8-4 MPa () () mm 40 50 63 80 100 N 882 1370 2160 3430 5390 )15% 23 8-5 (kgf) (kgf) (mm/s) (mm/s) 24
In the actual setting, adjust them after confirming the auto switch operating condition. 30 - Maintenance and Inspection For most suitable use of rotary table, regular inspection is required according to the operating condition.
MRQB32,40 18 1 17 2 16 2 34 2 15 1 33 O 1 14 1 32 4 13 2 31 2 12 O 1 30 1 11 2 29 1 10 1 28 S 1 9 1 27 S 1 8 O 2 26 1 7 1 25 2 6 1 24 4 5 1 23 4 4 1 22 4 3 1 21 O 3 2 1 20 O 1 1 1 19 1 12 14 2 28 1 13 2 27 1 12 4 26 1 11 1 25 R 1 10 1 32 24 2 9 2 23 2 8 4 22 8 7 1 21 2 6 2 20 2 5 1 19 2 4 1 18 O 4 3 1 17 O 4 2 1 16 4 1 1 15
Wiring example to robot controller (common to NPN/PNP) . 30 5-4.YASKAWA Plug & Play Kit . 31 5-4-1. Installing YASKAWA Plug & Play Kit . 31 5-4-2. Tool Presets . 36 5-4-3. Utility Window . 37 5-4-4. Air Gripper Integration Window . 38 5-5. Air supply . 42 5-6. Piping . 43 5-7. Operating environment . 43 5-8.
Low frequency operation The valve should be switched at least once every 30 days to prevent malfunction. The product requires periodic inspection every 6 month for optimum operating conditions. 3. Disassembly Do not disassemble the product except the replacement of the diaphragm assembly. Caution 1.
Take appropriate measures so that a force of 30 N or more is not applied to the lead wire. 1.
Low frequency operation Valves should be switched at least once every 30 days to prevent malfunction.Use caution regarding the air supply.. Manual override operation When the manual override is operated, connected equipment will be actuated. Confirm safety before operating.
Val: 1 to 65000 4 Valve ON/OFF counter (Counter) 8 Disable Does not generate an error. 1: This function is valid only when Hold/Clear priority of the system parameter is set to Handheld. 2: Some PLC does not support an idle mode. 3: The count is memorized every 30 seconds per channel.
M3 x 30 screw for connection to the valve manifold. Seal cap 1 pc. seal cap for unused fieldbus interface connector (BUS OUT). 1: Refer to page 28 for applicable connector cables. 2: Refer to page 16 for the LED Indication and Settings. -9No.EX-OMP0005-I Installation and Wiring Installation Connect valve manifold to the SI unit.
Loosen the hexagon socket head cap screws (M3 x 30:2 locations) which are fixing the SI unit. 2. Separate the SI unit to valve manifold. 3. Add and increase the attached tie-rod (2 pcs. per block) to the increased block respectively and pass through a block by the tie-rod. 4.
Inclination from the vertical line should be less than 5. 3) Install one-touch fitting (width across flats: 17) to drain port (width across flats: 30) and the drain tube. 4) Connect the 2 electric cables coming out from the auto drain with the two electric cables from the dryer unit. Insert the drip-proof connector to the deepest part.