10%, 12 to 15 VDCPower supply voltage 24 VDC type: 0.12 A or less Power supply voltage 12 to 15 VDC type: 0.18 A or less0 to 5 VDC, 0 to 10 VDC4 to 20 mA DC, 0 to 20 mA DCApproximately 10 k Approximately 250 1 to 5 VDC (Load impedance: 1 k or more) Output accuracy: Within ?6% (Full span)Within ?1% (Full span)Within 0.5% (Full span)Within ?0.5% (Full span)Within 0.2% (Full span)Within ?
EX500-DX_e Otherwise an injury can result. 3 Power supply (0 VDC) PNP sensor input Input type 4 5 3 4 5 4 Input 16 inputs Number of inputs 1 EX500-DX A Install the product using 2 M4 screws x 20 mm minimum with a head 8 maximum. 5 FE 24 VDC Voltage for input equipment Caution : No.2 pin of the M12 connector is internally wired to No.4 pin of the another connector which is located on the lateral face
NOTE 24 VDC, Class 2, 0.06 A 24 VDC, Class 2, 0.12 A Power supply Rated input current 8 mA When conformity to UL is necessary the SI unit must be used with a UL1310 Class 2 power supply. The product is a UL approved product only if it has a mark on the body.
Hysteresis 5 Variable Protection Short circuit protection -62No.PF-OMP0002-H Model PFMB7501 PFMB7102 PFMB7202 Output type Voltage output: 1 to 5 V, Current output: 4 to 20 mA (Refer to analogue output graph) Voltage output Output impedance approx. 1 k Analogue output 6 Impedance Current output Maximum load impedance: 600 at 24 VDC 300 at 12 VDC Response time 7 Linked with the response time
. -19No.PF-OMO0014-D Output for PF2W3 + Analogue (4 to 20 mA) type PF2W5--2Analogue output: 4 to 20 mA Load impedance: 300 (12 VDC) 600 (24 VDC) 1: Refer to the PF2W3 operation manual for details of the flow monitor. 3: Load indicates analogue input equipment such as an ammeter. -20No.PF-OMO0014-D Troubleshooting Troubleshooting If an operation failure occurs with the product, use the chart
Danger: Analogue output: 4 to 20 mA Max. load impedance: 300 (12 VDC) 600 (24 VDC) Operator 1: Refer to the PF2D3 operation manual for details of the flow monitor. 3: Load indicates analogue input equipment such as an ammeter.
Response time 3 1 s/2 s Analogue output Voltage output Output voltage: 1 to 5 V, Output impedance: 1 k Current output Output current: 4 to 20 mA Max. load impedance: 300 for 12 VDC, 600 for 24 VDC. -67No.PF-OMN0012-H Model PF3W30# Hysteresis Variable External input Voltage free input of 0.4 V or less (reed or solid state type) for 30 ms or longer Input/Output Input for copy mode 2-screen
Current consumption 10 mA or less Protection Protected against inverse connection Analogue output: 4 to 20mA Maximum load impedance: Analogue output Output type Analogue output: 1 to 5 V Output impedance: Approx. 1 k 500 or less (at 24 VDC) 100 or less (at 12 VDC) Analogue output Accuracy (Ambient temperature at 25 oC) 1.0%F.S. Linearity 0.5%F.S. Repeatability 0.2%F.S.
Current consumption 10 mA or less Protection Protected against inverse connection Analogue output: 4 to 20 mA Maximum load impedance: Analogue output Output type Analogue output: 1 to 5 V Output impedance: Approx. 1 k 500 or less (at 24 VDC) 100 or less (at 12 VDC) Analogue output Accuracy (Ambient temperature at 25 oC) 2.5%F.S. Linearity 0.5%F.S. Repeatability 0.5%F.S.
at 40 mA) Current leakage 100 A or less at 24 VDC Indicator LED Red LED illuminates when turned ON.
Check if a voltage of 24 VDC is applied to the EMG terminal. Stop command Apply 24 VDC to the EMG terminal. -78No. JXC-OMY0008-A Is the wiring connected correctly? Refer to the controller operation manual to confirm wiring, and check for broken wires and short-circuits. Correct the wiring so that the input/output of each signal is performed appropriately. 5.
.: JXC-MA1-2 Controller set up kit Control and motor Contents drive power supply -Controller Setting Kit -USB cable 24 VDC To M PWR Product No.: JXC-MA1 Note2) Motor drive power connector (Accessory)
ZB-OM00201-B Model Indication of the Replacement Parts (7) Supply valve, (8) Release valve Rated voltage 5 24 VDC 6 12 VDC Electrical entry Note 1) L L plug connector with lead wire LO L plug connector without lead wire M M plug connector with lead wire Note 2) MO M plug connector without lead wire Note 2) Note 1) All with light and surge suppressor.
. -10No.D-S-OMU0002-A Wiring SIO mode NPN output PNP output Brown (No.1) Brown (No.1) Load Black (No.4) Main circuit Black (No.4) Main circuit White (No.2) Power supply 15 to 30 VDC Load White (No.2) Power supply 15 to 30 VDC Load Load Blue (No.3) Blue (No.3) Connector pin numbers shown in brackets.
Hysteresis 4 Variable Protection Short circuit protection -66No.PF-OMS0002-B Model PFMC7501 PFMC7102 PFMC7202 Output type Voltage output: 1 to 5 V, Current output: 4 to 20 mA (Refer to analogue output graph) Voltage output Output impedance approx. 1 k Analogue output 5 Impedance Maximum load impedance: 600 at 24 VDC Current output 300 at 12 VDC Minimum load impedance: 50 Response time
Cable Signal Conductor Signal direction Description color name size (AWG) 1 Brown +24 VDC 26 IN Power supply connection to operate this product. 2 Blue 0V 26 IN 3 Green F.G. 26 Ground connection (resistance 100 or less) for use as a reference potential for this product. 4 Yellow Maintenance signal 26 OUT The maintenance signal turns ON when the emitter is contaminated or worn.
Connect 0 VDC wire (blue line) directly or as close as possible to 0 VDC terminal of the DC power supply. Environment Do not use the Pressure switch in environment containing corrosive gas, chemicals, sea water, water or vapor, or in a place where there is a possibility of adhesion of those substances to the Pressure switch. It can cause failure or malfunction.
D-Z73 D-Y59B D-Y59A Load voltage 24 VDC,100 VAC 24 VDC (10 to 28 VDC) 28 VDC or less Load current range Indicator light Application Relay, PLC 24 VDC Relay, PLC IC circuit, Relay, PLC 5 to 40mA, 5 to 20mA 5 to 40mA 40mA or less Air cylinder Rotary actuator Air gripper Directional control valve Fittings & Tubing Pressure switch Clean gas filter Flow control equipment Filter, Pressure control
Refer to the figure below. 5 6 24 VDC 12 VDC S VQZ 50 60 7 240 VAC, Hz With light/surge voltage suppressor (Except grommet type) Z 9 Other VZ Option As for the case of rated voltage [Others (9)], please contact SMC.
or less 100 VDC Neon bulb Bottom of the solenoid valve VFN How to Calculate the Flow Rate DC Coil Coil ZNR ZNR For obtaining the flow rate, refer to page 4-1-6.